Installation Guide

Before You Begin

Check that all parts are present.

Inspect the doorway or opening you intend to use.

Ensure the floor and ceiling (or both sides of the doorway, depending on your design) are clean and dry.

Keep away from children and pets at all times.

 

What's Included

• 100% Blackout Gloryhole Curtain
• 2 × high-strength metal tension rods
• 100% discreet packaging

 

Assembly instructions

Step 1 – Insert the Top Rod

Insert one of the high-strength tension rods into the top pocket of the privacy curtain, ensuring the curtain is the correct way round.

Step 2 - Position the Privacy Curtain 

Position the curtain into your chosen doorway or opening, ensuring the surfaces are solid, clean and dry.

Step 3 – Secure the Top Rod

Extend the top tension rod until it is firmly held in place. It should feel secure without requiring excessive force.

Step 4 - Tuck the Rod Pocket

Tuck the end of the curtain rod pocket over the rubber end of the extension rod, giving a flush, neat and completely discreet finish.

Step 5 – Secure the Bottom Rod

Repeat the process with the lower rod, pulling the curtain taut so it hangs flat.

Step 6 – Check Stability

Tuck the lower rod pockets over the extension bar and gently pull on the curtain to ensure both rods remain secure before use.

Safety Checks

Never hang or swing from the curtain or rods.
Check both rods before every use.
Re-tighten the rods if they become loose.
Do not install on fragile surfaces that could be damaged by pressure.
If the rods slip, remove and reinstall them before continuing.

Removing the Curtain

Release the tension from the lower rod first.
Remove the upper rod.
Fold the curtain neatly for storage.
Store in a cool, dry place.

Cleaning & Care

Wipe rods with a damp cloth.
Hand wash or machine wash the curtain on a short, low-temperature cycle. Do not tumble-dry.

Ensure the curtain is completely dry before storing.
Inspect the rods regularly for signs of wear or damage.

Helpful Tip

For the best appearance and stability, install the curtain in a standard internal doorway with clean, solid surfaces.